You’ve heard of plumbing tool dos – be careful with them, clean them, store them properly – here’s nothing for you. As any Experienced plumber Let me tell you, like many other tools, there is a wrong way to use plumbing tools. With consequences ranging from inconvenience to physical harm, you’ll want to know what not to do and here are 3 tips for you!
Pipe Wrench: You don’t want to over tighten
Over-tightening with pipe wrenches can equal structural damage to the pipe. Pipes are designed to not disintegrate even under a certain level of pressure, and exceeding that limit can cause cracks, leaks or even complete failure.
To avoid this, apply controlled pressure to the pipe wrench handles, gradually tightening the grip while observing resistance. Instead of exerting or applying excessive force sudden shockProceed with caution, especially when approaching the desired density.
For example, say you are tightening a threaded pipe joint. Begin by placing the pipe wrench on the fitting ensuring a secure grip. Turn the wrench in the required direction, feeling the resistance. Stop tightening when you feel firm resistance, preventing any structural strain on the pipe.
Plungers: You don’t want to overlook proper technique
Ignoring proper plunging techniques more often than not directly or indirectly means ineffective results. For example, without creating a proper seal, the submersible won’t create the suction necessary to remove the clog and water may spill out, which can cause a mess.
So, you want the plunger to completely cover the drain opening. Instead of forcing the plunge, press down firmly to create a seal, then use a controlled, rhythmic plunge. Maintain the seal throughout the immersion process for best results.
Say there’s a clogged toilet problem. Place the plunger over the drain hole so that it completely covers the opening. Press down firmly to create a seal, then submerge in a controlled manner while maintaining the seal. This way your plunger can do its job and remove the blockage effectively.
Plumbing tape: You don’t want to wrap excessively
Again, this is a good way to create leaks rather than prevent them. Initially, too much tape can create an uneven surface that prevents proper meshing of threaded connections, allowing water to penetrate.
When using thread seal tape, it is neatly wrapped around the thread in the twist direction. Instead of overlapping too much, use enough tape to cover the threads so you have a snug fit without compromising the effectiveness of the seal.
Say you are applying a thread seal tape shower head Hold the end of the tape with the threads of the pipe pipe and wrap it in the direction of the threads – a tight, uniform wrap without extra layers. This way you get a secure seal with no leaks in the threaded connection.
Be careful! Don’t make your plumber’s job more difficult. Avoid these plumbing don’ts.