With so many wall texture types available, finding the right one for your living space can be a challenge.
Wall textures allow you to express your creativity, create depth and help with specific designs.
You can hire a drywall company to texture your walls or do it yourself. We will cover many types of textured walls and how to get the look.
What are the different wall texture types?
Drywall is the most common type of wall in the United States. If you don’t like the smoothness of the drywall or need to mask imperfections, you can add texture over it. You can add texture to plaster walls as long as they are in good shape.
Popcorn textured walls
Popcorn ceiling has a stylish, rigid texture. They were popular 60s and 70s Thanks to their low cost and ability to hide imperfections. Popularity declined in the late 1980s when the EPA banned the use of asbestos. Original popcorn ceiling formula contains 10% asbestos fibers.
How to Apply Popcorn Ceiling Wall Texture
To get a popcorn texture ceiling, you need popcorn ceiling spray or textured ceiling spray. Once your room is ready and the walls are taped off, mix your spray with water according to package directions. Then, add the mixture to your drywall texture sprayer and spray it on the ceiling.
Orange peel wall texture
Orange peel drywall looks like orange peel. The tiny particles make it look classy, but it still feels smooth. Orange peels can add texture to walls in a more subtle way. Because orange peel hides imperfections, designers often use it in rental homes, commercial buildings, and medium drywall applications.
Orange Peeling Technique
Orange peel texture is sprayed on the wall surface. It does not contain the coarse particles of vermiculite or polystyrene, making it easier to work with. Many homeowners prefer it over popcorn. The goal of this wall texture is a splattered pattern that isn’t brushed and flattened.
Venetian wall architecture
Venetian plaster is an ancient wall texture type that uses lime dust or marble dust with a classic stucco finish. The end result is A wall that looks like it’s made of marble. Venetian plaster is ideal for formal rooms and Renaissance-style homes.
How to Apply Venetian Wall Texture
You can use a trowel to apply Venetian plaster to your walls. Your first layer should be thin with straight lines. After the first coat dries, apply another coat using your trowel in the opposite direction, creating an X-shaped pattern.
With the Venetian plaster dry, use sandpaper in a slight angle and circular motion to create a marble effect.
Knockdown wall texture
Knockdown drywall texture is one step above smooth walls and one step below orange peel walls. It has a warped texture that adds dimension in a subtle way. The knockdown drywall pattern became popular in the 90s and is still used today.
How to Apply Knockdown Wall Texture
To create a knockdown wall texture, you need to mix an aggregate joint compound with water. Then load the mixture into your drywall texture gun and splatter the walls. Finally, after about 10 minutes for the wall to dry, work in sections by scraping a knockdown knife over the compound.
Slap Brush Knockdown Wall Texture
The slap brush style has a fan-like appearance and is also known as a stipple texture. It looks like a hand plastered wall. It is an ideal choice for covering wall imperfections and has a beginner-friendly application.
How to Apply Slap Brush Wall Texture
There are two methods of achieving a slap brush wall texture. For both methods, you’ll need joint compound, water, and a bristle brush. Mix joint compound with water to thin it. Then apply joint compound to the wall and stamp with your slap brush. An alternative method is to dip the slap brush into drywall mud and stamp it into the wall.
Slap brush-knockdown wall texture
The slap-brush knockdown style combines the stomping of a slap brush with a drywall knife for a “knock down” pattern. This wall texture pattern is irregular and easy to DIY. You can even add a paint color to enhance its style.
How to Apply Slap Brush – Knockdown Wall Texture
Mix joint compound with water and apply it to your wall. After 10 minutes, stamp the joint compound with a slap brush. Then, go over the wet premises with a knockdown trowel.
Sand texture wall
A sand texture is a glossy finish that you can apply with a spray that uses sand and primer. You can create lighter and darker tones with this texture and choose the thickness of your sand grain.
How to apply sand wall texture
Mix sand with a watered-down primer or thin mud. Use a drywall texture gun to lightly spray the mixture on your wall. It works like a popcorn ceiling, but it’s thinner and rarely cracks.
A sand whorl has raised circles or semi-circles. It has an elegant texture and is typical for ceilings.
How to apply sandblasted drywall texture
To create a sand-rolled drywall texture, add sand to thin drywall mud. Load the mixture into your hopper or drywall gun and spray the wall. Then use a thick-bristled brush to create your desired swirl pattern.
Comb wall texture
Drywall comb texture involves creating overlapping lines and swirls, thus creating a comb-like appearance.
Although the technique creates a variety of looks, arch patterns stacked on top of each other are the most common. During application, each line alternates to create repeating patterns. This is known as the classic “comb texture” in drywall.
How to Apply Comb Drywall Texture
Apply drywall mud to the wall with a flat trowel. Then with a grooved trowel or brush, comb through the mud. Arches are the chosen pattern for this technique, but you can get creative. Depending on your skill level, this can be a fun DIY project.
Rosebud wall texturing
The Rosebud texture looks similar to the Slap Brush texture, but is more controlled. It is named after the rose bud and has a flower-like pattern. Although this texture is common for ceilings, you can also use it on your walls.
How to Apply Rosebud Textured Walls
To apply rosebud wall texture, dilute your drywall mud with water and apply to the wall with a paint roller working in eight-foot sections. Then use a rose brush to stamp on the wall. Repeat until the room is finished.
Lace texture walls
Lace drywall texture, also known as Spanish lace, creates a stucco-like pattern that mimics old-fashioned lace. It is most common on the interior walls of stucco houses.
How to Apply Lace Drywall Texture
Applying a lace texture involves spraying drywall mud on the wall and scraping it off with a drywall knife or skip trowel. This is one of the more complicated DIY drywall textures and is best left to a professional.
Frequently Asked Questions (FAQ)FAQ
Which wall texture is right for me?
It depends on what you want. If you’re feeling bold and independent, try a rose technique. Maybe you want something simple and DIY, then go for a sand texture.
It doesn’t matter which texture you choose if you hire a professional. You might even come up with a new idea and they might be able to run with it. It doesn’t hurt to ask, so be brave and find your perfect wall texture.
How do you repair cracks in textured drywall?
When repairing textured drywall cracks, use plaster of paris to cover cracks and fill small holes. Make sure the plaster I apply evenly. After you’re done, smooth the surface with a putty knife. To repair a one-inch hole, use a fiberglass patch that’s a little larger so it covers the hole and then glue it to the wall.
Do you paint drywall before texturing?
There is no reason to texture your drywall. Texture is when you want your walls to have a classic look or perhaps a contemporary look. It’s also done to cover imperfections, not to make the paint work better as it provides long-lasting protection.
How long should I wait for the wall texture to dry?
You have to wait 24 hours. When you open the window or use a box fan, it will speed up the drying process. After the mud dries, prime and paint the surface will be new drywall.
How much does it cost to tape and texture drywall?
The average cost of tape and mud drywall is between .35 and $1.10 per square foot. This price does not include sanding or final finishing to prime the surface for paint. Taping and mudding drywall joints for a standard 12-foot by 12-foot bedroom will cost $180 to $580.
Do you need to prime drywall before texture?
Yes, you should prime your walls before texturing them with latex drywall primer. You have to make sure that you don’t use undercoat because there will be too much gloss on the wall. This will ruin the classic look you want your end result to achieve.