Some people have dealt with a clogged drain at some point. This is not necessarily a dangerous problem, but it is certainly frustrating. If a sink drain is clogged, it’s important that you start unclogging it immediately because you won’t be able to use that sink until the problem is fixed. If the problem is with the bathtub drain, it can be incredibly disruptive. Of course, the offending plumbing fixture can overflow and there’s always the potential to cause more problems if not taken care of.
Plus, when clogged drains leave water in a sink or tub, they give off a less-than-pleasant odor that permeates your home.
A closed drain solution
Although clogged drains can be a nuisance, they can be resolved. If you feel uncomfortable trying to fix the problem yourself or nothing you try seems to work, don’t hesitate to call a professional. plumbers idaho For help. Otherwise, there are a few measures you can try on your own to get the drain back in working order. Check out this step-by-step guide to fixing clogged drains.
Step 1: Take a closer look
Before diving into any actionable solutions, take a closer look at the problem. If it’s a kitchen sink, grease or food particles may be the culprit. In a bathroom drain, hair can be a likely suspect. Different types of clogs may require different measures.
Step 2: Remove standing water
Once you’ve assessed the problem, it’s time to move on. If there is standing water in the sink, use a cup or bowl to bail out as much as possible. That will give you a better look at the clogs. It will make more tasks easier and more effective This will reduce the chances of nasty, smelly water spilling on you and your kitchen or bathroom as well.
Step 3: Try a plunger
With an empty sink, you can start by trying a standard toilet plunger. Completely cover the drain opening with the plunger to create a tight seal. Use the plunger just as you would to unclog a toilet. The pressure it creates may be enough to dislodge the clog. A plunger can work on many different types of clogs, so it’s a versatile solution.
Step 4: Use a drain snake
If your drain won’t budge with a plunger, you can try a drain snake. It can grab the materials blocking the drain and pull them out or at least break them up. Insert the snake into the drain and turn the handle a few times. Then, slowly pull it out of the drain. Then run hot water down the drain.
Step 5: Boiling water
For formed clogs Congealed grease, soap scum, and food particles, you may need to solve the boiling water problem. Just bring a large pot of water to a rolling boil and pour it into the affected drain. This can melt the grease and free the clog. You may need to repeat this a few times for full effectiveness.
Step 6: Baking Soda and Vinegar
If boiling water doesn’t clear the clog, you can try a mixture of baking soda and vinegar. Pour about half a cup of baking soda into the clogged drain. Then, heat about a cup of white vinegar in the microwave for a minute and pour in the baking soda. Quickly drain over a bowl and stand back. There will be a few seconds of agitation as the mixture of baking soda and vinegar fizzes and bubbles. that chemical reaction Can dissolve clogs. Wait about 15 minutes and flush the drain with hot water to see if it worked.
Keep your drains flowing freely
Clogged drains are common, but they can be fixed. Get your drains flowing freely again using one or a combination of the measures listed here. If these techniques for unclogging your sink drain don’t work, don’t hesitate to reach out to a professional plumber for help.