How To Repair Leaky Single And Double Handle Faucet Cartridges


Believe it or not, repairing a leaking faucet is actually as easy as changing a lightbulb. It is a quick fix for these leaks to replace the faucet cartridge of a kitchen faucet or a bathroom faucet.

Here’s how you can do it in eight easy steps.

RELATED: Home Plumbing Tips – Remember These Plumbing Basics

Call Cartridge | 8 Easy Steps to a Quick Leaky Faucet Repair

Faucet Cartridge Repair Materials:

  • Replacement cartridge set

Faucet Cartridge Repair Tools:

  • Crescent twist
  • Flat blade screwdriver or a utility knife
  • Phillips screwdriver
  • clothes
  • Pliers

Step 1: Drain the faucet

Regardless of the type of faucet – be it a single handle cartridge faucet or a double handle cartridge faucet – worn-out cartridges and O-rings are some of the most common reasons behind these leaks. The first step to fixing them is to simply drain the faucet.

Start by turning off the water supply to the sink by closing the shutoff valve. Often, you can find it directly under the sink with a small handle and valve.

Next, turn on the faucet to completely drain the lines and relieve any pressure that may have built up.

Step 2: Plug in your sink

Fixing a leaky faucet often involves small nuts and screws. The last thing you want is to accidentally drop one of those screws down the drain, turning this simple process into a complicated one.

Avoid this by plugging your sink. If your sink doesn’t have a stopper or basin plug, even a small piece of cloth is fine.

Step 3: Remove the handles

With your flat blade screwdriver, pry off the decorative caps to reveal the bottom screws holding the handle in place. Now, remove the screws using a Phillips screwdriver before removing the handles from the cartridge.

Step 4: Close the bonnet nut

Some faucets have a bonnet nut that secures the faucet cartridge in place. If you have one, remove it with your crescent wrench.

Step 5: Remove the cartridge

With the bonnet nut off, you can now proceed to remove the faucet cartridge by pulling straight up.

If you need to, you can use pliers to pull the stem for extra leverage. Just make sure to use a rag or tape to avoid damaging other parts of the faucet.

RELATED: These 9 Obsolete Tools You Should Have in Your Workbench Toolbox

Step 6: Install the new cartridge

Before installing your replacement cartridge, use a rag to soak the faucet shank with water.

Try going for a solid-brass faucet cartridge replacement if it fits your sink. They are much better and more durable than plastic alternatives.

Install your replacement cartridge by aligning the tab with the slot in the faucet. Push into place as firmly as possible.

Once done, screw the bonnet nut back on and tighten it using the crescent wrench.

Step 7: Put it back together

Reinstall the handle and put the caps back on.

Step 8: Check for leaks and check water flow

Turn your water back on and check your faucet for any leaks. Check the water flow as well. Your hot and cold adjustment should work properly.

With a single-handle faucet, the water should not heat up once the handle has cooled. If this is the case, fix it by removing the handles again and rotating the cartridge by 180 degrees.

With everything working perfectly, replace the decorative caps and pat yourself on the back for a job well done.

Want to see it in action? Watch this video on how AMRE Supply replaces a faucet cartridge:

Since leaking faucets are so easy to repair, a leak shouldn’t be something a DIYer has to deal with. Replacing the faucet cartridge is one of the quickest and most common ways to fix this problem.

Aside from replacing the faucet cartridge, are there other ways to fix leaking faucets that you know of? Share them with us in the comments section below!

Coming up next:

Calling all crafting DIYhards, the DIY projects you need! If you want to contribute to us then click here.

Don’t forget to stay connected with us Facebook, TwitterAnd Instagram!


Source link

Leave a Reply

Shopping cart


No products in the cart.