HomeDIY CraftBest Tool To Fill Nail Holes In Drywall

Best Tool To Fill Nail Holes In Drywall


For me, this task falls into the annoying but necessary category before painting a wall. However, there are some tricks and tools that make this task much easier. Today, I’m going to share with you my favorite all-in-one tool for filling nail holes in drywall.

My favorite tool to use

I’ve tried a bunch of different things but I always come back to my real experience: 3M Small Hole Repair Tool. This tool comes with a putty knife and sanding pad. I recommend grabbing a small piece of 180 grit sandpaper although the sanding pad tends to get a little sticky after a while.

My favorite tool for filling nail holes in drywall

It is suitable for filling nail holes up to 3 inches in diameter and is quite large! This all-in-one tool makes the job much easier and less messy, in my opinion. With the little holes, you can literally rub a little stain with your finger, and you’re done! No sanding necessary. For larger holes, follow the steps below.

How to fill nail holes in drywall

With small holes, you can only rub a little This spot In it with your finger and you’re done! No sanding necessary.

How to fill nail holes in drywall step by step

Larger holes require greater dexterity. Follow the following steps.

Step 1: Sand

How to fill nail holes in drywall

The first thing you want to do is sand the hole slightly to remove loose drywall and rough edges.

Step 2: Spackle Apply

How to fill nail holes in drywall step by step

Squeeze a little bit of spackle In the hole. Make sure the stain comes out evenly or above the surrounding wall.

Step 3: Use a putty knife

How to fill nail holes in drywall step by step

Use a putty knife on Rod tool To smooth out stains as even with the wall as possible.

Step 4: Leave it to dry

Let it dry completely! Do not try to sand it before it is completely dry.

Step 5: Sand

How to fill nail holes in drywall step by step

After it dries, use 180-grit sandpaper to sand the spots until they are smooth and perfectly even with the wall. You can also use the sanding pad on the stripper if it hasn’t been sanded yet.

How to fill nail holes in drywall step by step

Step 6: Paint

Final step! Paint your sparse nail holes and watch them disappear!

How to fill nail holes in drywall

Common mistakes

Not putting enough chips in the hole

If you don’t fill the hole with enough stain, you will have a dent in the wall that is clearly visible to the eye. The way to fix this is to fill the hole again by following the steps above.

Overfilling the hole

Conversely, you can create a big mess in the hole if you overfill it – to the point where clumping spreads far beyond the hole. The smaller and more precise, the better. If you end up overfilling, just make sure you sand it well before painting. Touch the wall surface with your hands to make sure it is smooth.

Sand it before it dries

You should make sure the spots are completely hard and dry to the touch before sanding. If you try to start sanding before it is completely dry, the blocks will fall out in clumps and the hole will not be completely filled. (Trust me, I’ve been there.)

Not sanding enough

How to fill nail holes in drywall step by step

You will see a bump or raised area in the final result if you do not sand it enough until it is smooth and even with the wall. If this happens, you will have to sand it again and repaint this area.

I’m happy to share my own Favorite tool With you all. It makes it super easy to get near professional results with your painting projects! The more you do it, the better you can achieve it. But don’t sweat it over these minor drawbacks. Nothing is ever perfect. When in a pinch, use your wall paint in a matte finish as this hides most imperfections.



RELATED ARTICLES

Leave a Reply

Most Popular

Recent Comments