HomeDIY Craft8 DIY Plumbing Tips You Should Know

8 DIY Plumbing Tips You Should Know


Your property’s plumbing systems are incredibly important, but often, it’s something we overlook until there’s a problem. However, it doesn’t have to be – and luckily, our team is on hand today to help you learn more about your property’s plumbing systems and the various DIY plumbing tips you could potentially consider to help keep your plumbing in good shape. condition

Woman fixing sink

8 DIY Plumbing Tips You Should Know

As a homeowner, it is extremely important to keep your property’s plumbing systems in good condition. However, it’s easy to give your plumbing the TLC and avoid the care it deserves. Still, there are several DIY steps you can take to take care of your plumbing system, which may include the following.

#1 Avoid blocking plumbing with oil and grease

After finishing a hearty meal, it’s often tempting to rinse any grease and residue straight down the drain – but that can actually be a big mistake. In fact, in many cases, oil and grease can get stuck especially around pipe ends and in plumbing bends. And while it may not cause a significant amount of damage in the beginning, it can get worse over time.

For example, to keep your plumbing in good condition, avoid putting oil and grease down the drain. It is often safer to remove as much grease as possible before cleaning plates and utensils.

#2 Be careful with solids

Along a similar line of thinking to the previous point, it’s incredibly easy to accidentally block your pipes if you flush solid particles down the drain (when they’re not supposed to). Notably, this is a common problem in kitchen sinks and the like where large amounts of food can spoil over time. However, this can also happen with baths and showers in some cases, especially if you wash away a lot of debris or dirt (think pet paws and the like).

#3 Be careful with pipe unblockers

So, you’ve got a block pipe. The obvious thing is to unblock it, right? Well, not necessarily. In fact, while removing blockages is undoubtedly important, it’s important to remember that some products and tools can do more harm than good.

For example, if you notice a blockage in your pipe, don’t immediately reach for harsh chemical cleaners or sharps removal tools. They have a high chance of damaging the pipes themselves, which can be a much more significant problem than you might initially think.

Man and boy DIY plumbing

#4 Be careful when drilling

Many people overlook how easy it is to accidentally puncture or damage a pipe when drilling into a wall. As a result, if you are planning any DIY home improvement activities around your home, we strongly recommend taking a more cautious approach to drilling and always checking the position of the pipes before starting.

#5 Leak the address as soon as possible

Leaks may seem like a minor problem in many cases, but that’s not entirely true, and while they may start as minor inconveniences, they can develop into something more serious. Notably, a slight water leak can lead to a nasty crack; Otherwise, dripping water can seep into the walls and cause more serious structural damage to the property. As such, it is imperative to repair or replace leaking pipes as soon as possible.

#6 Watch out for over-tightened fittings

In many cases, over-tightening the fittings may seem like a good way to prevent problems from re-emerging in the future. The reality is often far from this, however, and an overly tight fitting can have less than positive results. Notably, stripped screws and broken bolts are common complications of overtightened fittings, and should be kept in mind if you’re doing any DIY plumbing work.

Instead of resorting to over-tightening fittings, why not consider using plumber’s tape (Teflon tape)? Instead of over-tightening joints and fittings for your property, this simple option can help ensure a tight seal and prevent leaks while creating a more durable system. If you decide to use Teflon tape, keep in mind that most household plumbing projects will typically use white tape, while yellow tape will often be used for gas line connections and the like.

#7 Keep a close eye on the thermostat and temperature

One of the most common problems in homes across the country is thermostat and temperature issues with your boiler, which can leave you struggling with a cold house and cold water supply. As such, regular monitoring of the thermostat and water temperature is crucial.

If you start to notice that things aren’t as warm as they should be, double check that the settings are formatted correctly and that there aren’t any major issues that could be affecting the boiler’s performance. If none of these are the case, you may want to look at possible next steps to restore the heating system’s functionality

#8 Know when to call in the professionals

At the end of the day, while there are so many possible options to help enable DIY plumbing methods and the like, at some point there will be a limit – and that’s when you need to know when to call in the professionals.

Specialist local teams often provide essential plumbing services, making their support vital to a safe home. As such, we strongly recommend that you contact a specialist local team if something more complex arises. But remember: not every team of plumbers necessarily offers the same level of service and support. As such, always choose a team that prides itself on quality, reliable and thorough plumbing support, e.g. Spartan Plumbing Dayton OHGet the best solution for your home.

Last thought

Keeping your home in good shape shouldn’t be an impossible goal; In line with this thought, maintaining your plumbing system is extremely important, and there are plenty of DIY methods you can use to help. However, if things seem a bit complicated for your experience level, be sure to contact a professional local plumbing team for assistance.



RELATED ARTICLES

Leave a Reply

Most Popular

Recent Comments